8014753/ZVZ7/2018-03-22 • © SICK AG • Subject to change without notice 13
Operating instructions Distance measuring device DL100 Pro – RS-422
Safety
2.4
Requirements to skilled persons and
operating staff
WARNING!
Danger of injury in case of insufficient qualification!
Improper use may cause considerable injury and property
damage.
Therefore:
• Any work must be performed by the designated
persons only.
The follwong qualification requirements for the different areas of activity
are described in the operating instructions:
•
Instructed persons
were instructed in the tasks assigned to them and possible dangers in
case of improper conduct in the scope of instruction by the operator.
•
Skilled persons
are able to perform the tasks assigned to them based on their technical
training, knowledge and experience, as well as knowledge of the
relevant provisions, and to independently recognize possible danger.
•
Electricians
are able to perform work at electrical systems based on their technical
training, knowledge and experience, as well as knowledge of the
relevant standards and provisions, and to independently recognize
possible dangers.
In Germany, the electrician must meet the provisions of the accident
prevention provisions BGV A3 (e.g. Elektroinstallateur-Meister). Other
countries are subject to corresponding regulations that must be
observed.
2.5
Work safety and special danger
Observe the safety notes listed here and the warnings in the other chapters
of these instructions to reduce dangers to health and avoid dangerous
situations.
