4
Project planning
4.1
Manufacturer of the machine
DANGER
Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
Conduct a risk assessment and check whether additional protective measures are
required.
b
Comply with the applicable national regulations derived from the application (e.g.,
work safety regulations, safety rules, or other relevant safety guidelines).
b
Do not combine the components of the safety light curtain with components from
other safety light curtains.
b
Apart from for the procedures described in this document, the components of the
safety light curtain must not be opened.
b
The components of the safety light curtain must not be tampered with or changed.
b
Do not carry out any repairs on the device components. Improper repair of the
protective device can lead to a loss of the protective function.
4.2
Operator of the machine
DANGER
Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
b
Changes to the electrical integration of the safety light curtain in the machine
controller and changes to the mechanical mounting of the safety light curtain
require another risk assessment. The results of this risk assessment may require
the entity operating the machine to meet the obligations of a manufacturer.
b
Apart from for the procedures described in this document, the components of the
safety light curtain must not be opened.
b
The components of the safety light curtain must not be tampered with or changed.
b
Do not carry out any repairs on the device components. Improper repair of the
protective device can lead to a loss of the protective function.
4.3
Design
Overview
This chapter contains important information about the design.
4
PROJECT PLANNING
26
O P E R A T I N G I N S T R U C T I O N S | deTec4
8021645/1EB0/2022-04-28 | SICK
Subject to change without notice
