Because of the integrated D-sub shell, when the viewing window is on the side the laser
beam is emitted at angle of 105° relative to the longitudinal axis of the device. The
device has three electrical M12 round connectors.
Interfaces to external timers, such as photoelectric sensors or incremental encoders,
enable reading pulses independent of the control. The device makes the read results
available for further processing via its data interfaces.
The device can scan the codes on one side of stationary or moving objects in a
conveyor system (single-side reading). By combining several devices, multiple sides can
be scanned in a single pass (multi-side reading). The device produces a scanning line
(line scanner) in order to identify the code. In the grid scanner version, the device
produces eight scanning lines that are offset parallel to one another.
Configuration
Diagnostics
(local)
SOPAS ET
SOPAS ET
Computer
CLV61x Dual Port
(CLV61x-Dx41x)
AUX (USB
4
)
Host /AUX (Ethernet, port 2)
Host /AUX (Ethernet, port 1)
V
s
PROFINET
PROFINET
Scanner
1
Decoder
2
Interfaces
3
5
6
Figure 6: Block diagram for CLV61x-Dx41x (without digital input)
1
Scanner
2
Decoder
3
Interfaces
4
USB interface
3)
type-dependent. Not present on device variants with a memory card slot.
5
Configuration or diagnostics (local)
6
Supply voltage V
S
3)
Service interface, for temporary use only
3
PRODUCT DESCRIPTION
22
O P E R A T I N G I N S T R U C T I O N S | CLV61x DualPort (PROFINET)
8017842/19XD/2021-11-19 | SICK
Subject to change without notice
