6 RN200 user manual
6.3
It is possible to change the brightness of the indicators (all together) using parameter P.0496:
the greater the value of the parameter, the greater the brightness of the lamps. The value can
be set between 1 and 10 (default value = 5).
Led off
Led on
Led blinking
Icon
Function
Indicates that the operating mode is OFF/RESET.
Indicates that the PROGRAMMING menu is being accessed.
The controller is in another operating mode.
Indicates that the operating mode is MANUAL.
The controller is in another operating mode.
Indicates that the operating mode is AUTOMATIC.
Flashing 90% on: indicates that the operating mode is REMOTE
START.
The controller is in another operating mode.
Indicates the presence of at least one alarm.
Indicates the presence of at least one warning.
There are no anomalies.
Indicates that at least one external device (inverter) is
communicating correctly with RN200.
Indicates that no external device (inverter) is communicating
correctly with RN200.
Indicates that the Can Bus interface is active, functioning and in
ERROR-ACTIVE
mode.
Flashing 25% on: indicates a communication anomaly: the
interface is in
ERROR-PASSIVE
mode.
Flashing 75% on: indicates a communication anomaly: the
interface is in
BUS-OFF
mode.
Indicates that the Can Bus interface is disabled.
Indicates that a Modbus slave connection is active (serial ports,
Ethernet or USB).
Indicates that no Modbus slave connection is active (serial
ports, Ethernet or USB).
