SICE S 65 E, Instruction Manual

Page: 125 / 352

Operator's Manual
S 65 E - S 65 E C
125
Lighting LED activation/deactivation
It is possible to activate or deactivate the LED light when present on the machine.
After the list of the setting programmes is displayed:
- Select the lighting LED activation/deactivation icon
- Three icons will appear on the display, representing the possible light modes:
LED1 . In this configuration, the light turns on when:
- an ALU P programme is set and the internal sensor is extracted. When the sensor returns
to the rest position, the light turns off;
- at the end of a spin cycle if residual unbalances are present for 30 seconds;
- in CP (centred position) for an additional 30 seconds.
LED2 . In this configuration, the light turns on in the conditions indicated for the LED1
programme and, in addition, also in the following conditions:
- during the entire measuring cycle and with all balancing programmes;
- during the Hidden Weight programme when selecting the two planes behind the spokes.
LED OFF : deactivated
- Using the Enter button , select the desired mode. The selected icon is enabled
if it is in the following configuration:
- press to confirm the selection made and exit the function.
LASER activation/deactivation
It is possible to activate or deactivate the laser when present on the machine.
After the list of the setting programmes is displayed:
- Select the LASER activation/deactivation icon
- Two icons will appear on the display that represent the possible LASER modes, as
shown below:
LASER OFF.
LASER ON. In this configuration, the laser turns on in the following cases:
- for the manual application of all adhesive weights.
IMPORTANT:
If the operator selected an ALU 1P or ALE2P (precise) balancing programme and there is a
weight holder, the laser will not be activated as the weight is applied using the holder itself.
- in the Hidden Weight programme, the selection of the two new positions behind the
spokes is done in the 6 o'clock position using the laser line.