SICE S 65 E, Instruction Manual

Page: 124 / 352

124 Operator's Manual
S 65 E - S 65 E C
pressing the
Enter
button
- Press the Exit button to save the setting and exit .
This programme can be exited only by selecting a language, then the unbalance image
is displayed again.
Customisation Configuration
This programme allows the user to save some selected data permanently, e.g. name, city,
address, telephone number, advertising messages, etc..
The data will subsequently be displayed on the initial image.
- Select the Firm data setting icon .
- The screen displays a page where the data can be set, comprising:
• 4 lines on which data can be entered (in the centre of the screen);
• a keypad for setting characters;
• 5 control icons;
• 1 icon for exiting the programme;
• 1 help icon.
- Select the character to be entered inside the circular sector shown on the screen.
- Confirm selection by pressing the Enter button.
Control icons are:
Go to next line:
used for moving the cursor to the next line. If a word has already been entered on the
new line, the word will be deleted automatically.
Go to previous line:
used for moving the cursor to the previous line. If a word has already been entered on
the new line, the word will be deleted automatically.
Delete last character entered:
moves the cursor back to the left so that the character is deleted.
Set upper case/lower case characters:
selects upper case or lower case characters, alternately.
The set data is stored when the programme is exited, i.e. by selecting the
Exit
icon.
You are advised to set your own surname and name on the first line, the name of the city on
the second line, the street on the third line and the telephone number on the fourth line.