Aqua Cubic Multiplex
-
MAN0004 Rev. B 29.03.99
22/33
Tab. 20 – Consequences of the events on the working of the controller on the basis of the programming.
Events
Programming
0HP 1HP 2HP 0dP
The reg. time is set off
with the finished days.
The volume reaches
the reserve.
The volume runs
out.
Remote start active
for 15 seconds.
0 0 0 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
0
0
0
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
0 0 1 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
0
0
1
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
0 1 0 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
0
1
0
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
0 1 1 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
0
1
1
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
1 0 0 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
1
0
0
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
1 0 1 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
1
0
1
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
1 1 0 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
1
1
0
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
1 1 1 0
The reg. does not start.
The reg. does not start.
Immediate start.
The reg. does not start.
1
1
1
1
The reg. does not start.
Imm. start. (1)
Immediate start.
The reg. does not start.
N.B. :
1) The start of the cycle is immediate only when both of the columns in service have their volume under the value of
reserve. The column with the lowest volume of the two goes into in regeneration. If only one column reaches the
value of reserve, the regeneration does not start, even at the programmed time.
6.2.5.b – Programming of the flags
Tab. 21 shows the options available for the modality
PPPA
:
Tab. 21 – Selection of the operative modality “two single columns in parallel, PPPA”
FLAG
Display
Operative state / Data visualised
PROGRAM
P 0 0 0
State of access to the selection of the operative modality
ENTER
P P P x
Visualisation of the current operative modality (x = 0, 1, 2, 4, A)
2 / +
P P P A
The key
2 / +
modifies the operative modality as per tab. 4 : returns to A
PROGRAM
0 H P
0 H P 0
FLAG not used
PROGRAM
1 H P
1 H P 0
FLAG not used
PROGRAM
2 H P
2 H P 0
FLAG not used
PROGRAM
3 H P
3 H P 0
FLAG not used
PROGRAM
0 C P
0 C P 0
Modality of the litre counter divider (0 = free see par. 6.6)
