Aqua Cubic Multiplex
-
MAN0004 Rev. B 29.03.99
5/33
1 – INTRODUCTION
Aqua Cubic Multiplex
is a controller dedicated to the
realisation of water
softening
systems working on the
principle of the ionic exchange of the resins.
The systems can be produced according to the following
operative modalities:
-
one single column
;
-
one duplex column
;
-
two alternated single columns
;
-
two single columns in parallel
;
three single columns;
Aqua Cubic Multiplex automatically calculates the volume
of water which can be treated based on the
hardness of the water, on the volume of the tanks and on the exchange capacity of the resins used, values
which must be programmed by the operator when the appliance is installed.
It is also possible to programme a
percentage of reserve of the total volume,
which allows for the
regeneration of the resins to be started before they have completely run out.
Aqua Cubic Multiplex
allows for columns with
different dimensional characteristics
to be controlled,
that is with different volume values, also allowing the differentiation of the regeneration cycle times.
The
regeneration
cycle is completely
programmable
: it can be started up by the control on the
volume
,
manually,
or by an
external signal,
it is possible to cancel the whole cycle or to jump one or more phases.
The regeneration may be
immediate
or
deferred
to a programmed time.
Aqua Cubic Multiplex
may be connected to a computer via
RS232
using the cable cod. 881-1, so as to be
able to acquire and then analyse the progress of the work parameters
Aqua Cubic Multiplex
is equipped with a
buffer battery
which allows for the work parameters to be
retained in the memory should the electricity current fail.
Aqua Cubic Multiplex
is equipped with an
EEPROM memory
, on which the programmed data is
memorised, with the capacity to retain data for over
10 years.
Aqua Cubic Multiplex
, like all the range of SIATA controllers, conforms to the EEC Directives and is
produced in the SIATA plant of Montespertoli which operates with the certified Quality System according to
the regulation
ISO 9001 / UNI EN ISO 9001.
