55
If select Type User, you may find related information in the follow-
ing items. Enter the information directly from the keyboard and
press <Enter>. Those information should be provided in the docu-
mentation from your hard disk vendor or the system manufacturer.
The user may also set those items in AUTO to automatically configure
the hard disk drives parameter when the system power on.
If a hard disk drive has not been installed, select NONE and press
<Enter>.
Drive A type/Drive B type
This item specifies the types of floppy disk drive A or drive B that
has been installed in the system.
Floppy 3 Mode Support
Floppy 3 mode refers to a 3.5-inch diskette with a capacity of 1.2 MB.
Floppy 3 mode is sometimes used in Japan.
Video
This item selects the type of adapter used for the primary system moni-
tor that must matches your video display card and monitor. Although
secondary monitors are supported, you do not have to select the type in
Setup.
Halt On
This item determines if the system will stop when an error is detected
during power-up.
Memory
This item is only for display. It is automatically detected by POST
(Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conven-
tional) memory installed in the system. The value of the base memory
is typically 640K for systems with 640K memory installed on the
mainboard.
Extended Memory
The BIOS determines how much extended memory is present during
the POST. This is the amount of memory located above 1MB in the
CPU's memory address map.
