74
$
$
$
$
$
PnP/PCI Configurations
The PnP/PCI Configurations allows you to configure the ISA and PCI
devices installed in your system.
Reset Configuration Data
If you enable this item and restart the system, any PnP configuration
data stored in the BIOS setup is cleared from memory. New updated
data is created.
"
The choice: Enabled, Disabled.
Resources Controlled By
You should leave this item at the default Auto (ESCD). Under this set-
ting, the system dynamically allocates resources to plug and play de-
vices as they are required. If you cannot get a legacy ISA (Industry
Standard Architecture) add-in card to work properly, you might be able
to solve the problem by changing this item to Manual, and then open-
ing up the
IRQ Resources
sub-menu.
In the
IRQ Resources
sub-menu, if you change any of the IRQ assigna-
tions to Legacy ISA, then that Interrupt Request Line is reserved for a
legacy ISA add-in card. Press
Esc
to close the IRQ Resources sub-menu.
"
The choice: Auto (ESCD), Manual.
PCI/VGA Palette Snoop
This item is designed to overcome some problems that can be caused
by some non-standard VGA cards. This board includes a built-in VGA
system that does not require palette snooping so you must leave this
item disabled.
"
The choice: Enabled, Disabled.
