71
Video Off Option
This option defines if the video is powered down when the system is
put into suspend mode.
"
The choice: Always On, Suspend -> Off, Sus stay -> Off,
All Mode -> Off.
Video Off Method
This item defines how the video is powered down to save power. This
item is set to DPMS (display power management software) by default.
"
The choice: Blank Screen, V/H SYNC + Blank, DPMS Supported.
Switch Function
Enables you to set the System Management Interrupt (SMI) button
function in DOS.
"
The choice: Disabled, Break / wake.
MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the
system from a power-saving mode, use this item to specify the interrupt
request line (IRQ) that is used by the modem. You might have to con-
nect the fax/modem to the mainboard Wake On Modem connector for
this feature to work.
"
The choice: NA, 3, 4, 5, 7, 9, 10, 11.
Hot Key Function As
Enables you to set the power button function in DOS.
"
The choice: Disabled, Power off, Suspend.
HDD Off After
The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disable.
"
The choice: Disabled, 1 Min ~ 15 Min.
Power Button Override
Under ACPI (Advanced Configuration and Power management Inter-
face) you can create a software power down. In a software power
down, the system can be resumed by Wake Up Alarms. This item lets
you install a software power down that is controlled by the normal
power button on your system. If the item is set to Instant Off, then the
power button causes a software power down. If the item is set to Delay
4 Sec. then you have to hold the power button down for four seconds
to cause a software power down.
"
The choice: Instant Off, Delay 4 sec.
