29
BIOS write protect setting (JP3)
This motherboard offers JP3 jumper to make BIOS read-only.
Pin 1-2 (Default- disable the function)
Pin 2-3 (Enable the function)
A2
Clear CMOS setting (JP1)
You can clear CMOS to restore system default setting. Please follow
below procedure to clear CMOS.
Pin 2-3 (Default, Normal)
Pin 1-2 (Clear CMOS)
Step 1.
Turn off the system and unplug the AC power.
Step 2.
Remove ATX power cable from onboard power connector.
Step 3.
Locate JP1 and short pins 1-2 for a few seconds.
Step 4.
Return JP1 to its normal setting by shorting pins 2-3.
Step 5.
Connect ATX power cable back to onboard power connector.
A1
JP1
1
1
1
JP3
1
1
1
