41
3.3 System Memory Configuration
The MS21 mainboard has two 168-pin DIMM sockets that allow you to
install from 32MB up to 1.0GB of system memory with PC 100/133 SDRAM
(Synchronous DRAM). Each DIMM (Dual In-line Memory Module) socket
can accommodate 32MB, 64MB, 128MB, 256MB and 512MB 3.3V single
or double side 64-bit or 72-bit wide data path SDRAM modules.
Install Memory:
Install memory in any or all of the banks and in any combination, shown as
follows :
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You
can check the total system memory value in the BIOS Standard
CMOS Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional SDRAM
modules in available DIMM banks. The total system memory is calculated by
simply adding up the memory in all DIMM banks. After upgrade, the new
system memory value will automatically be computed and displayed by the
BIOS Standard CMOS Setup menu.
DIMM
Socket
Memory Modules
Module
Quantity
DIMM 1
32MB, 64MB, 128MB, 256MB and 512MB
168-pin 3.3V SDRAM
x 1
DIMM 2
32MB, 64MB, 128MB, 256MB and 512MB
168-pin 3.3V SDRAM
x 1
