58
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your
system is started.
"
The choice: On, Off.
Gate A20 Option
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
default value.
"
The choice: Fast, Normal.
Typematic Rate Setting
If this item is enabled, you can use the following two items to set the
typematic rate and the typematic delay settings for your keyboard.
"
The choice: Enabled, Disabled.
Typematic Rate (Chars/Sec)
If the item Typematic Rate Setting is enabled, you can use this item to
define how many characters per second are generated by a held-down
key.
"
The choice: 6, 8, 10, 12, 15,20, 24, 30.
Typematic Delay (Msec)
If the item Typematic Rate Setting is enabled, you can use this item to
define how many milliseconds must elapse before a held-down key
begins generating repeat characters.
"
The choice: 250, 500, 750, 1000.
Security Option
If you have installed password protection, this item defines if the pass-
word is required at system start up, or if it is only required when a user
tries to enter the Setup Utility.
"
The choice: Setup, System.
OS Select For DRAM > 64MB
This item is only required if you have installed more than 64 MB of
memory and you are running the OS/2 operating system. Otherwise,
leave this item at the default Non-OS2.
"
The choice: Non-OS2, OS2.
