- 38 -
Front Panel USB Connector Header
This header used to connect the cable at-
tached to USB connectors which mounted
on front panel. USB connectors on front
panel shared same signal with USB con-
nectors on back panel, only a USB con-
nector available on front panel or on back
panel to each USB0 or USB1.
Line-Out and Mic-In Header
This header used to connect the cable at-
tached to Line-Out and Mic-In phone jack
which mounted on front panel. This
header shared same signal with Line-Out/
Mic-In on back panel.
Enhanced IDE Ports and Floppy Connector
The ME62/ME63/ME64 mainboard features two 40-pin dual-channel IDE
device connectors (IDE1/IDE0) providing support for up to four IDE devices,
such as CD-ROM and Hard Disk Drives (H.D.D.). This mainboard also
includes one 34-pin floppy disk controller (FDC) to accommodate the
Floppy Disk Drive (F.D.D.). Moreover,
this mainboard comes with one 80pin
ATA66 ribbon cable to connect to IDE
H.D.D. and one 34-pin ribbon cable
for F.D.D. connection.
Note:
Please connect you system
H.D.D. on IDE 0
Important:
Ribbon cables are directional, therefore, make sure to always
connect with the red cable stripe on the same side as pin #1
of the IDE1/IDE0 or FDC connector on the mainboard.
25
26
27
