- 34 -
Factory Reserved (J27)
Open (Default)
PS/2 Keyboard & PS/2 Mouse Connectors
Two 6-pin female PS/2 keyboard & Mouse
connectors are located at the rear panel
of the mainboard. Depending on the com-
puter housing you use (desktop or
minitower), the PS/2 Mouse connector is
situated at the top of the PS/2 Keyboard
connector when the mainboard is laid into
a desktop, as opposed to a minitower
where the PS/2 Mouse connector is lo-
cated at the right of the PS/2 Keyboard's.
Plug the PS/2 keyboard and mouse jacks
into their corresponding connectors.
USB0/USB1 Port Connectors
Two female connectors USB0/USB1 share
the same USB (Universal Serial Bus) bracket
at the rear panel of your mainboard. Plug
each USB device jack into an available
USB0/USB1 connector.
COM1 Connector
This mainboard can accommodate one
serial device on COM1.
Attach a serial device cable to the DB9
serial port COM1 at the back panel of
your computer.
8
9
10
PS/2 keyboard
PS/2 Mouse
USB0
USB1
COM1
11