- 28 -
Jumpers & Connectors Guide
Use the mainboard layout on page 11 to locate CPU socket, memory banks,
expansion slots, jumpers and connectors on the mainboard during the
installation. The following list will help you identify jumpers, slots, and
connectors along with their assigned functions:
CPU/Memory/Expansion Slots
Slot 1
: CPU Socket for Slot 1 Pentium II/III processors
Socket 370 : CPU Socket for PGA 370 Celeron processors
J4, J5
: Two DIMM Sockets for 8, 16, 32, 64, 128, 256 MB
3.3V SDRAM
AMR
: AMR Expansion Slot for Audio / Modem Riser Cards
UPT
: USB Hub / Panel Link / TV-out Expansion Slot for
CV11, CV12
PCI
: Three 32-bit PCI Expansion Slots
Jumpers
J1
: Keyboard & PS/2 Mouse Power-On
(requires to always set J1 jumper in order to enable
either or both KB & PS/2 mouse power-on functions.
In addition, you need to set Power On Function in
BIOS setup.)
J25
: ICH Voltage
J9
: AMR Slot Setting
J10A & J26
: Force CPU FSB at 100/133MHz
J12
: Clear CMOS
J16
: Boot-Block Protection
J23
: Enable / Disable Suspend To RAM
J27
: Factory Reserved
Back Panel Connectors
KB
: PS/2 Keyboard
MS
: PS/2 Mouse
USB
: 2 × USB (Universal Serial Bus)
COM1
: Serial Port 1 (DB9 male)
1
2
3
4
6
8
5
7
10
11
9
9
