- 39 -
ATX Power Supply Connector (JWR1)
Locate the 20-pin male header ATX power connector (JWR1) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into JWR1 ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in
unless the guides match perfectly making sure that pin#1 is
properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into
place to ensure a solid attachment.
Note 3:
This mainboard requires an ATX power supply of at least
200 watts with power good signal.
Cooling Fan Connectors for CPU1 (FAN1), CPU2 (FAN2),
& Chassis (FAN3)
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU1 (FAN1), CPU2 (FAN2), and Chassis device (FAN3) cool-
ing fans.
Note:
Both cable wiring and type of plug may vary depending on the
fan maker. Keep in mind that the red wire should always be
connected to the +12V header and the black wire to the ground
(GND) header.
29
28
