- 70 -
If you set this field to "manual" choose specific resources by going
into each of the sub menu that follows this field (a sub menu is pre-
ceded by a ">").
The choice: Auto(ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt
a type, depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the ISA bus and
is not available to any PCI slot. Legacy ISA for devices compliant with
the original PC AT bus specification, PCI/ISA PnP for devices compli-
ant with the Plug and Play standard whether designed for PCI or ISA
bus architecture.
The choice: Legacy ISA and PCI/ISA PnP.
Memory Resources
This sub menu can let you control the memory resource.
Reserved Memory Base
Reserved a low memory for the legacy device(non-PnP device).
The choice: C800, CC00, D000, D800, DC00, D400, N/A.
Reserved Memory Length
Reserved a low memory length for the legacy device(non-PnP device).
The choice: 8K, 16K, 32K, 64K.
PCI/VGA Palette Snoop
Leave this field at Disabled.
The choice: Enabled, Disabled.
INT Pin 1/INT Pin 4 Assignment
Select the PCI IRQ assignment for each PCI INT Pin.
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
