- 33 -
Clear CMOS (J12)
J12 is used to clear CMOS data. Clearing CMOS will result in permanently
erasing the previous system configuration settings and restoring the original
(factory-set) system settings.
Pin 1-2 (Default)
Pin 2-3 (Clear CMOS)
Step 1.
Turn off the system power (PC-> Off)
Step 2.
Remove jumper cap from J12 pins 1-2
Step 3.
Place the jumper cap on J12 pin 2-3 for a few seconds
Step 4.
Return the jumper cap to pin 1-2
Step 5.
Turn on the system power (PC-> On)
Boot-Block Protection (J16)
J16 is used to protect the Boot-Block in BIOS. If the virus infects the
Boot-Block section, your system will not be able to boot forever.
You may choose to open the jumper for
Boot-Block protection; however, please
close the jumper if you need to reflash
the BIOS. A protected Boot-Block may
cause your BIOS reflash failed.
Close (Default)
Suspend to RAM (J23)
Pin 1-2 (Disabled Suspend
to RAM)
Pin 2-3 (Suspend to RAM)
(Default)
5
6
7
