- 26 -
F
Jumper
Clear CMOS Setting (JP1)
JP1 is used to clear CMOS data. Clearing CMOS will result in the permanently
erasing previous system configuration settings and the restoring original (fac-
tory-set) system settings.
Pin 1-2 (Default)
Pin 2-3 (Clear CMOS)
Step 1. Turn off the system power (PC-> Off).
Step 2. Remove ATX Power cable from ATX Power connector.
Step 3. Remove jumper cap from JP11 pins 1-2.
Step 4. Place the jumper cap on JP11 pin 2-3 for a few seconds.
Step 5. Return the jumper cap to pin 1-2.
Step 6. Plug ATX Power cable into ATX Power connector.
Step 7. Turn on the system power (PC-> On).
J1
: EXT. PRINT port
JP3/JP6/JP7
: DUAL USB header/ USB connectors
JP17
: EXT. GPI header
1
JP1
Clear CMOS
1
1
E7
E8
E9
A1
