Shuttle FT20 User Manual Download Page 71

Page: 71 / 81

- 66 -

MODEM Use IRQ

This item allows you to set the MODEM Use IRQ.

The Choice: NA, 3, 4, 5, 7, 9, 10, or 11.

Video Off In Suspend

This item allows you to set the Video Off In Suspend.

The Choice: Yes or No.

Video Off Method

This determines the manner in which the monitor is blanked.

V/H SYNC+Blank This selection will cause the system to turn off

the vertical and horizontal synchronization
ports and write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video
buffer.

DPMS

Initial display power management signaling.

The choice: V/H SYNC+Blank, Blank Screen or DPMS.

PM Timers

HDD Power Down

The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disable.

The choice: Disabled or 1 Min ~ 15 Min.

Suspend Mode

This item allows you to set the Suspend Mode.

The Choice: Disabled, 1Min, 2Min, 4Min, 8Min, 12Min, 20Min,

30Min, 40Min, or 1Hour.

PowerOn\WakeUp Function

Press <Enter> to enter the sub-menu of detailed options.

Soft-Off By PBTN

Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has " hung".

The choice: Delay 4 Sec or Instant-Off.

Summary of Contents for FT20


















































































Search results

Summary of Contents for FT20

Reviews:

Related manuals for FT20

Brands by name

Popular brands

Shuttle FT20, User Manual

Search results

Summary of Contents for FT20

Reviews:

Related manuals for FT20

Brands by name

Popular brands