- 38 -
3.3 System Memory Configuration
The FT20 mainboard has two 184-pin DIMM slots that allow you to install from
64MB up to 2GB of system memory. Each 184-pin DIMM (Dual In-line Memory
Module) Slot can accommodate 64MB, 128MB, 256MB, 512MB, and 1GB of
PC2100, PC2700 or PC3200 compliant 2.6V single or double side 64-bit wide
data path DDR SDRAM modules.
Install Memory:
Install memory in any or
all of the slots and in any
combination shown as
follows.
Devices Used on DIMMs
Size Per CS
64 M-bit (2M x8-bits x4 bnaks)
64 Mbyte
64 M-bit (1M x16-bits x4 bnaks)
32 Mbyte
128 M-bit (4M x8-bits x4 bnaks)
128 Mbyte
128 M-bit (2M x16-bits x4 bnaks)
64 Mbyte
256 M-bit (8M x8-bits x4 bnaks)
256 Mbyte
256 M-bit (4M x16-bits x4 bnaks) 128 Mbyte
512 M-bit (16M x8-bits x4 bnaks) 512 Mbyte
512 M-bit (8M x16-bits x4 bnaks) 256 Mbyte
1 G-bit (32M x8-bits x4 bnaks)
1 Gbyte
1 G-bit (16M x16-bits x4 bnaks) 512 Mbyte
DIMM1
DIMM2
64-Bit
Single Side
X
64-Bit
Double Side
X
128-Bit
Single Side
Single Side
128-Bit
Double Side
Double Side
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR SDRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new system
memory value will automatically be computed and displayed in the field " Stan-
dard CMOS Setup" of BIOS setup program.
Memory Configuration:
Note : Total 2 DIMM
capacities are
up to 2GB max
and 1GB per
DIMM.
Note : Please plug the
DIMM1 first.
