Shuttle FT20 User Manual Download Page 73

Page: 73 / 81

- 68 -

Hot Key Wake Up

When the Wake Up Function is set to Hot Key, use this item to set the hot
key combination that turns on the system.

The choice: Ctrl-F1~F12 or Any key.

PS2 Mouse Wake Up

When the Wake Up Function is set to PS2 Mouse, use this item to set the
PS2 mouse combination that turns on the system.

The choice: Disabled or Enabled.

PWRON After PWR-Fail

This item allows you to select power on function when power fail.

The choice: Former-Sts, Off or On.

Suspend Break Events

Press <Enter> to enter the sub-menu of detailed options.

IRQ[1] ( KeyBoard )

[Enabled/Disabled]

IRQ[3]

[Disabled/Enabled]

IRQ[4]

[Disabled/Enabled]

IRQ[5]

[Disabled/Enabled]

IRQ[6] (Floppy Disk)

[Disabled/Enabled]

IRQ[7]

[Disabled/Enabled]

IRQ8J ( RTC )

[Disabled/Enabled]

IRQ[9]

[Disabled/Enabled]

IRQ[10]

[Disabled/Enabled]

IRQ[11]

[Disabled/Enabled]

IRQ[12] ( PS2 Mouse ) [Enabled/Disabled]

IRQ[14] ( Primary IDE) [Enabled/Disabled]

IRQ[15] (Secondary IDE)[Disabled/Enabled]

Summary of Contents for FT20


















































































Search results

Summary of Contents for FT20

Reviews:

Related manuals for FT20

Brands by name

Popular brands

Shuttle FT20, User Manual

Search results

Summary of Contents for FT20

Reviews:

Related manuals for FT20

Brands by name

Popular brands