Showa DS-6200, Operating Manual

Page: 19 / 150

2 INSTALLATION & CONNECTION
18
INSTALLATION & CONN
ECTION
Chapter
2
2-1. Installation
To install the DS-6200 into a control panel, use the following procedure.
1.
Make a hole in the panel according
to the panel-cut dimensions.
2.
Remove the screws (two), and
remove the guide rails from both
sides.
* Do not use other screws than
those installed to the DS-6200 body.
3.
Fit in the DS-6200 from the front of
the panel.
4.
Install from the rear the guide rails
having been removed from both
sides in Step 2, and fix them with
the screws (two).
2
INSTALLATION & CONNECTION
92mm
Panel-cut
+1
0
–
Panel thickness
1.6 to 3.2mm
dimensions
92mm
+1
0 –