-7-
Model W1842 (For Machines Mfd. Since 6/17)
IN
TR
O
DU
CT
IO
N
Controls.&.Components
Refer to the
Figures.1–2
and the following descriptions to
become familiar with the basic controls and components
of this machine. Understanding these items and how they
work will help you understand the rest of the manual and
stay safe when operating this machine.
To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
A.. Table.Height.Handwheel:
Raises and lowers table
to accommodate different workpiece thicknesses.
One complete revolution moves the table
approximately
5
⁄
64
".
B... Gearbox:
Produces one of two feed speeds when the
combination gears are changed. Use the 31/46T gear
combination to plane at 24 FPM; use the 20/57T gear
combination to plane or mould at 12 FPM.
C... Depth.Scale:
Indicates relative depth of cut.
D... Moulding.Fence.Lock.Knobs:.
Allow operator to
adjust position of fences for moulding operations.
E.. Anti-Kickback.Fingers:.
"Grab" workpiece if a
kickback occurs, reducing the risk of kickback-
related injuries.
F.. ON.Button:
Starts motor and cutterhead.
G.. STOP.Paddle:.
Cuts power to motor when pushed in.
Figure.2
. Location of ON/OFF paddle
switch.
F
G
Figure.1.
Location of controls and
components.
D
A
B
C
E
Summary of Contents for W1842
Page 65: ...Model W1842 For Machines Mfd Since 6 17...
Page 68: ......
