SHNING 3D Aoralscan 2, User Manual

Page: 84 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 83 -
the margin line and for viewing the undercut;
③
Extract Margin Line: used to extract and save the margin line of the
marked (corresponding) teeth;
④
Check Undercut: Used to calculate and view the undercut area of the
marked (corresponding to the order) teeth.
⑤
Check Bite: used to adjust and view the occlusal space of the upper
and lower jaws;
Adjust Coordinate
Click the button under the
“pre-design” process to enter the
interface on which you can adjust the adjustment data, as shown below:
Rotate the 3D model with the left mouse button and right-click the data to
adjust the position of the jaw.
Click the button to confirm and save the current adjustment result.
Click the button to cancel and discard the current adjustment result,
and exit the adjustment coordinate process.