SHNING 3D Aoralscan 2, User Manual

Page: 61 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 60 -
⑥
Login: Fill in the account and corresponding password. The contact
information filled in during registration is displayed in the upper left corner of
the software.
⑦
Phone login:First select the area, then enter the mobile number. The
default area is China.
(11) Add Lab: If you have not added a lab, you can click this button to add
a network on the Dental Cloud website to establish a cooperative relationship
with the lab.
(12) Refresh: Refresh the list of dental labs.
(13) Connected lab: The accepted labs are listed.
7.3.4. Data storage
Introduction to order data:

*.dentalProject: exoCAD Order project document

*.inProject: Shining 3D intraoral scanning order project
document

*.stl: Untextured 3D data (binary)

*.obj: Textured 3D data, used it with *.mtl/*.jpg

*.beb: Shining
’s own format 3D data

*-margin.xyz: Extractive edge line data.

Project: Scan project data document, store the temporary
project document.
The data is saved in the directory as set before, and the default path is
C:\DentalOrder. The file is named by date as shown below.