SHNING 3D Aoralscan 2 User Manual Download Page 57

Page: 57 / 112

Aoralscan 2 User Manual

SHNING 3D TECH Co.,Ltd Copyright



- 56 -

before uploading the design. The right-click menus or operate icons for such

orders are: Load/Open in Explore/Duplicate/Delete/Re-Upload.



Canceled: Order data has been uploaded to the dental cloud, and the

doctor has cancelled the order. Doctors can refuse to take orders before the

labs uploads the design. The right-click menu or operate icons for such orders

is: Load/Open in Explore/Duplicate/Delete.

(5) The descriptions for orders operation icons.

Icon Example

Description

Load the currently selected order.

Open the folder where the currently selected order is

located.

Duplicate the currently selected order and save it as a

new order.

Delete the currently selected order form the order list,you

can choose whether to delete stored order files and

scanned data.

Upload the currently selected order to the dental cloud .

Order data has been uploaded to the dental cloud, and the

doctor has cancelled the currently selected order.

Download Design.

Confirm Design.

Request Re-design.

Delivery Information.

Summary of Contents for Aoralscan 2













































































































Search results

Summary of Contents for Aoralscan 2

Reviews:

Related manuals for Aoralscan 2

Brands by name

Popular brands

SHNING 3D Aoralscan 2, User Manual

Search results

Summary of Contents for Aoralscan 2

Reviews:

Related manuals for Aoralscan 2

Brands by name

Popular brands