SHNING 3D Aoralscan 2, User Manual

Page: 108 / 112

Aoralscan 2 User Manual
SHNING 3D TECH Co.,Ltd Copyright

2019 All Rights Reserved
- 107 -
(2) Hold the scanner tip firmly with your thumb and forefinger on both
sides, and then gently slide the scanner tip off from the scanner, as illustrated.
CAUTION
Do not place your finger(s) on the mirror of the tip when detaching
as this may result in damage to the mirror.
(3) Hold the supplied protection cap with the triangle mark facing upward.
Then, align the protection cap blocks to the matching slots on the front end of
the scanner body.
(4) Slide the protection cap onto the scanner to prevent damage and dust.
(5) Pay particular attention to inspect the mirror of the tip to ensure that
the mirror is not cracked or broken and there is no scratch on it.
CAUTION
If the mirror of the tip has cracks or scratches, stop the cleaning
process and contact your local distributor or service provider.
(6) Gently clean the inner and outer sides of the tip using mild pH-neutral
soap water and a soft brush for 3 minutes.

When cleaning the inner surface of the tip, insert the soft brush into the
tip from both the front and rear ends, and move the brush lightly in tiny circles.