manualshive.com logo in svg

Shinybow USA SB-3403, Instruction Manual

Share
Download
Shinybow USA SB-3403 Instruction Manual Download Page 8

FEATURES

•  (3) input ports support HDMI, DVI, DisplayPort, VGA and YPbPr signals
• 

Supports up to 4K2K@30Hz or 3840x1080@60Hz input signals

• 

Maximum output resolutions up to 1920x1200

•  Equipped with (4) HDMI outputs in one unit
• 

Multiple units cascade to build a large-scale high resolution video wall

•  (30) pre-defined playback modes selected via the Dip Switch
• 

Connects directly with various video sources up to 4K2K

• 

Users can create all kinds of playback modes for regular, portrait and irregular video wall with different size, resolution and bezeled 

LCD’s at any angle and position

• 

Flexible aspect ratio control across the entire video wall. This function can allow users to use any signal content from non-PC based 

devices and still keep the required aspect ratio without distortion

•  Integrated with the function for the entire image (4 LCD’s) position shift without changing aspect ratio
• 

4K2K HDMI loop out port for monitoring and daisy chain connections

• 

Programmable EDID to optimize video quality

• 

Auto image shift to prevent LCD’s from burn-in marks

•  PiP (picture in picture) and PoP (side by side) multi-content functions
•  Comprehensive PC tool for easy video wall configuration
•  Power on/off control via auto signal detection
•  Up to (5) self-made display modes can be saved and have looping playback on the video wall
• 

No video splitter, PC or software is required

6

FEATURES

Summary of Contents for SB-3403

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands