42
SETTINGS
OVERLAP (BEZEL COMPENSATION AND POSITION SHIFT)
• [Overlap]
is to align the location of each Display Unit (SB-3403).
•
Users can adjust the image location in the H&V position up to +_900 pixels.
•
Through the
[Overlap]
adjustment, users can align each Display Unit into
the right position on the video wall cascaded with multiple SB-3403.
NOTE:
The
[Overlap]
value will change the image capture area and scaling factor. In multiple SB-3403 cascade applications, the
[Overlap]
value in each SB-3403 should be the same so that all images have the same scaling factor. Users can use the
[Overlap]
adjustment to change the aspect ratio in the video wall image as well.
Example for (2) SB-3403 cascade:
Overlapping pixels for the Zone A (Display Unit A) & B (Display Unit B) should be the same. Users can set the
[Zoom]
&
[Pan],
open
the
[Overlap]
menu and select the
[RH Edge]
for Zone A &
[LH Edge]
for Zone B, then increase the
[Overlap]
value gradually in
both Zone A & Zone B. Users will see (2) images from both the SB-3403 coming closer until the image edges match together.
