48
SETTINGS
Example of a low cost RS-232 controller.
• Users can save up to (5) settings into the
[Profile]
.
•
Users can connect this RS-232 controller to each SB-3403 through the RS-232
cable in parallel.
• Click the Profile button in the RS-232 controller to power on/off the system or
select the display Profile.
If a separate RS-232 control is required, users need to set a different
[Box ID]
for
each SB-3403 and put the ID # into the RS-232 command.
[EDID] setting
Selective EDID settings are available on the SB-3403.
a. The SB-3403 can support a large range of input signal timings—from SVGA up to 4K2K. In order to get the best video
performance, users need to select different input signal resolutions.
b. Different PC display cards have different settings and behaviors. Many users may not be able to establish the correct
settings.
c. High end media players or servers can support a large range of outputs—from 720p to 4K2K. If there is not an EDID
selection function, only one default EDID can be selected by the media player. The system may not show the best video wall
output quality.
d. Different display modes may show different final image aspect ratios. Users can utilize different EDID settings to change
the input signal timing and get different output aspect ratios.
• Activate EDID Setting Menu:
[Options]→[Setting]→[EDID]
•
Use the IR remote control to select the desired EDID.
•
After selecting the EDID, the PC or media will automatically change the
output timing settings.
•
Press the
[INFO]
key to check if the input and output timings are set
correctly.
