Shini SG-3650E, Manual

Page: 54 / 56

54(56)
9) Loosen the lock wiring in the screen bracket and remove the screen bracket.
Note!
Lift the screen with hands so it would not fall down.
10) Take out the screen.
11) Catching to the screen and take it out outwardly.
12) Clean the regrind storage bin, screen bracket and the screen.
13) Clean both surface of the cutting chamber.
14) Clean the wheels with bright dust-precipitator.
Reinstall after cleaning
1) Install the screen bracket.
2) Lift the handle of the screen bracket and push into screen bracket.
3) Fold down the screen bracket and install the screen to ensure to install the
screen accurately via checking whether aligning the bulge and the holler of
the bracket.
4) Taking h of the front pant of screen bracket edge and push the front of the
screen bracket in the direction of cutting chamber. Fix the screen bracket via
connect the pothook to the screen bracket.
5) Install the regrind storage bin.
6) Close the feed box.
7) Install the rubber shutter of the feed box.
8) Tighten the locking buckle.
9) Check whether the feed box is exhausted.
10) Turning on the main power switch.
11) Turn on the machine.