45(56)
tightened.
5) Start the machine.
6) Check that the granulator motor rotates in the direction indicated by the arrow
on the cutter pulley.
7) If any direction of rotation should be incorrect:
a) Stop.
b) Switch off the main power.
c) Change two income wires of the motor.
d) Restart and recheck.
4.3 Start / Stop of the Machine
SG-36E series of granulator use the start and stop button located on the control
panel for controlling.
Picture 4-1
：
Start / Stop of the Machine
Note!
Never stop the granulator before any material in the hopper or cutter
chamber is completely granulated.
Residusal material will clog the rotor in the granulator during restart.
The motor will be overloaded and the overloading protection will trigger.
Summary of Contents for SG-3650E
