Shini SG-3650E, Manual

Page: 17 / 56

17(56)
2. Structural Features and Working Principle
2.1 General Description
SG-36E granulator is designed for grinding plastic waste to granulate for
recycling. The plastic waste should be free from metal parts and contamination
before granulating. Mount magnet at the feed port to prevent metal scraps from
getting into cutting chamber and brings damage to the blades. The granulator is
controlled by start/stop and emergency stop button on control panel.
2.1.1 Working Principle
Parts name:
A. Feed port B. Rotating blades C. Fixed blades D. Screen E. Storage bin
Picture 2-1
：
Working Principle
The plastic waste if feed via feed port (A) and falls down into the cutting
chamber, where rotating knives (B) cut the plastic waste against fixed knives (C)
to granulate. A perforated screen (D) determines the size of the granulate. The
screen is located in the lower section of the cutting chamber and can easily be
changed to give the desired granulate size. The grnulate passed the screen
and falls down in the storage bin (E). After this, the granulate is ready for re-use
in the production machine, or to be transported to a container for later use.