Shindaiwa IDG3100M, Owner'S And Operator'S Manual

Page: 22 / 28

19
Oil Drain Plug
Packing
Inspection Item
Pre-Operation
Inspection
Inspection Period
50th hour
Every
100
hours
Every
200
hours
Every
400
hours
Every
1,000
hours Every
2,000
hours
1 Fuel (Check/Add)

2 Engine Oil (Check/Add)

3 Engine Oil (Replace)
1st time

2nd time
and after

4 Oil Filter (Replace)
1st time

2nd time
and after

5 Cooling Water (Check/Add)

6 Cooling Water (Replace)

Or every
two years
7 Fuel Filter (Clean)
1st time

2nd time
and after

8 Fuel Element (Replace)

9 Fuel Tank (Drain Water/Clean)

10
Fuel/Oil/Cooling Water (Check
for Leaks)

11 Battery Fluid (Check/Add)

12 Air Cleaner Element (Clean)
1st time

2nd time
and after

13 Air Cleaner Element (Replace)

14 V-belt (Adjust Tension)
1st time

2nd time
and after

15 V-belt (Replace)

Or every
two years
16 Radiator Fin (External) (Clean)

17 Radiator (Internal) (Clean)

18
Fuel/Cooling Water/Oil Hoses,
and Anti-Vibration Rubber
(Replace) 
Or every
two years
19
Intake/Exhaust Valve
Clearance (Adjust/Fit)

Adjust

Fit
20
Fuel Injection Valves
(Check/Adjust)

21
Fuel Injection Pump
(Check/Adjust)

9-1. Engine Oil (Replace)
Remove the oil plug.
Remove the oil drain plug to drain the oil from
the engine.
Tighten the oil drain plug.
Add oil through the oil inlet while checking the oil surface level by using the oil gauge
until the oil reaches the maximum level. (Add approximately 1.9 L.)
Tighten the oil plug.
1st time 50th hour
2nd time and after Every 100 hours
1
2
3
4
5
1