Shindaiwa DG1000ANZ, Owner'S And Operator'S Manual

Page: 33 / 56

30
Replacing the Battery
Two batteries are connected in series order. Whenever you replace battery or disconnect
cables, always proceed with the following steps, otherwise battery may short-circuit.
(1) Replacing the battery installed on the left
side toward the control panel:
Remove the clamp and cable from negative (-)
post from the battery on the right side (always
remove negative side first)
Remove the clamp and cable from positive (+)
post from the battery on the right side
Remove the clamp and cable from negative (-)
post from the battery on the left side (always
remove negative side first)
Remove the hold-down clamp from the battery on
the left side
Remove the clamp and cable from positive (+)
post from the battery on the left side
Remove the left side battery from the seat
※ ※ ※ ※
Reinstall the new battery in the reverse order
(always install the cable to the positive (+) post of the new battery first).
(2) Replacing the battery installed on the right side toward the control panel:
Remove the clamp and cable from negative (-) post from the battery on the right
side (always remove negative side first)
Remove the hold-down clamp from the battery
on the right side
Remove the clamp and cable from positive (+)
post from the battery on the right side
Remove the right side battery from the seat
※
※ ※
※
Reinstall the new battery in the reverse order
(always install the cable to the positive (+) post of the new battery first.
< NOTE >
Make sure that the removed cable does not come in contact with the battery post.
1
2
3
4
5
6
1
2
3
4