Shindaiwa DG1000ANZ, Owner'S And Operator'S Manual

Page: 19 / 56

16
5-3. Fuel Piping Switch (3Way Fuel Valve)
CAUTION:
Always make sure that the engine is stopped when working on fuel line.
Always be sure to wipe up any spilled fuel.
After working on the piping, check that there is no Diesel fuel leakage.
By switching
three-way fuel valve fuel will be supplied from the external tank.
In that case, the built-in tank will not be used.
(1)
Using fuel from built-in fuel tank
The lever for 3-way valve is set to A when the equipment is shipped. In addition, both
the external fuel intake and the external fuel return are safeguarded with PT-1/2 plugs.
Do not remove the plugs, when using the built-in fuel tank.
< NOTE >
Always set the lever for 3-way valve back to A position and cover the external
fuel intake and return port with the supplied plugs, after the hoses are removed.
(2)
Using fuel from external fuel tank
Connect hoses from the external fuel tank to the external fuel intake and the
external fuel return ports, and set the lever for 3-way valve to B position.
You can now supply the fuel from the external fuel tank.
For detail instruction, refer to
“9-6. Connecting with External Fuel Tank”
（＜
A
＞
position
）
3-Way valves
外部燃料供給口 外部燃料戻り口（プラグ PT１/２）
EXTERNAL
FUEL
INTAKE
(PLUG :
EXTERNAL
FUEL
RETURN
(PLUG :
3-Way
3-Way valves
(
＜
B
＞
position)
To EXTERNAL FUEL TANK