Shindaiwa DG1000ANZ, Owner'S And Operator'S Manual

Page: 14 / 56

11
5-2. Meters and Gauges
Engine Meters and Gauges
(1) Hour Meter
Displays the operating time. Use this to schedule periodic
inspection. Be careful as the hour meter operates when the starter
switch is at RUN regardless of whether the engine is running or
stopped.
(2) Water Temperature Gauge
Water Temperature Gauge displays the temperature of engine
coolant. Normal temperature may vary depending on the
environment, but it should be between 75 to 90 degrees Celsius.
< NOTE >
If the temperature exceeds normal value, disconnect the load,
idle the engine at 1000min
-1
, and wait until the reading falls to
the normal temperature range.
(3) Fuel Gauge
It shows the volume in the fuel tank.
When filled up, it shows
『
F
』
.
When the hand is approaching to
『
E
』
, the volume is coming to
empty. Replenish fuel enough promptly.