SHERCO SHERCO 50 SE 2022, Owner'S Manual

Page: 95 / 226

95
FRANÇAIS
ENGLISH
ESP
AÑOL
DEUTSCH
CHECKS AND MAINTENANCE
Remove the headlight plate and headlamp.
Remove the rubber protector .
Turn the socket a quarter turn counterclockwise to
extract it from the holder.
Press lightly on the bulb while turning counterclockwise
and extract it from the socket .
Install the new bulb.
Headlight bulb S2 : 12V 35/35W.
Install the socket with the bulb back into the holder
in a clockwise direction.
Reinstall the rubber protector .
Always keep the taillight glass clean (  p.96).
The rear taillight group is a sealed LED unit.
In the case of burning out of one or several of the
LED’s it is necessary to replace the whole unit.
For a replacement, contact a SHERCO authorized
service center.
Remplacing the headlight bulb
1
1
2
HEADLIGHT
Always keep the headlight glass clean (

p.96).
Regularly check the head light beam for the proper direction.
TAILLIGHT
2
1