SHERCO SHERCO 50 SE 2022, Owner'S Manual

Page: 83 / 226

83
FRANÇAIS
ENGLISH
ESP
AÑOL
DEUTSCH
SETTINGS
To adjust the clutch lever lift the rubber cover
and use the adjusting fitting to obtain a free
play of 5mm.
To perform this operation correctly it is recommended
that it be performed on a hot engine. Using an
electronic rev counter that is connected to the spark
plug cable.
Utilize a screwdriver on the adjuster screw and
set the idle to 1900 rpm.
A
C
B
A
B
In the case where the throttle cable slack is greater
than 3 mm, measured from the edge of the handle,
it is necessary to perform an adjustment using the
adjuster on the carburetor .
THROTTLE CABLE SLACK ADJUSTMENT
CLUTCH LEVER ADJUSTMENT
IDLE SPEED ADJUSTMENT
A
B
A
C
B