SHERCO SHERCO 50 SE 2022, Owner'S Manual

Page: 84 / 226

84
CHECKS AND MAINTENANCE
Keep the motorcycle upright in relationship to the
ground.
Remove the screw : the oil must reach the lower
edge of the opening.
To restore the level, proceed to fill by means of filler
cap .
Once finished, replace the screw and the the
cap .
Always perform this operation when the motor
Is hot:
- Position a container under the engine.
- Remove the filler cap and the drain plug .
- Completely drain the compartment.
- Replace the plug .
- Add in 820 cc of oil.
- Check the level as described above.
- Replace the filler cap .
Tightening torque Medium strength thread lock Grease
Hot oil can cause severe burns!
Dispose of the used oil in accordance with local regulations.
Replace the transmission oil after the first 500 km. For the following oil changes, see the table at
(

p.98)
, using the lubricants
recommended in
(

p.68)
.
WARNING
NOTE
2
3
3
1
2
1
1
LEGEND SYMBOLS
CHECKING THETRANSMISSION OIL
REMPLACING THE TRANSMISSION OIL
2
3
1