SHERCO 125 ST, Owner'S Manual

Page: 79 / 226

79
FRANÇAIS
ENGLISH
ESP
AÑOL
DEUTSCH
MAINTENANCE PROCESSES
Disassembly:
- Remove the 2 screws and washers that fasten
the plate.
- Unplug the cable terminals.
- Remove the brake light.
Type: since this is an LED light, it is advisable to
replace everything.
Reassembly:
- Conduct disassembly steps in reverse.
The front brake fluid tank is located next to the
handle. It has a small viewer to check the fluid level.
To add:
- Remove the two screws from the tank cover.
- Remove the inner seal.
- Fill with fluid.
Brake fluid type: DOT 4.
Replacing the brake light
Checking and adding front brake fluid
Conduct this operation with the ignition off.
Conduct this operation with the ignition off.
The brake fluid level should be between 3 and 4 mm from the
upper lip.
WARNING
WARNING
WARNING
A
A