SHERCO 125 ST, Owner'S Manual

Page: 88 / 226

88
MAINTENANCE PROCESSES
To remove the front wheel:
- Loosen the lower fork screws , on the right side.
- Remove the 2 screws .
- Remove the disc protection, as well as the front
brake calliper.
- Unscrew the front wheel axis and remove it.
- Remove the front wheel.
- Align the wheel with the fork feet.
- Place the front wheel axis in position.
- Screw the front wheel axis.
- Tighten the 2 screws on the axis flange.
- Place the calliper.
- Place the disk protection.
- Tighten the disk calliper screws .
Disassembling and assembling the front wheel
Place the motorcycle in vertical position and immobilise the
back part.
While inserting the wheel, avoid damaging the disc with the
brake pads.
Once everything is assembled, check proper brake operation
before using.
WARNING
WARNING
A
A
B
B
Front wheel axis
Front wheel axis flange screw
Front brake calliper screw
M18
M8
M8
50Nm
25Nm
25Nm
A
B