VL-E610S/VL-E610H
VL-E660S/VL-E96E
VL-E98E
3-5
(3)Remove the microphone wire spacer from the Frame V.
Microphone connector
Microphone wire spacer
Detail of area B
Frame V
(4)Pull out the microphone wire cable with care to prevent it from interfering with the mechanical parts, and remove the
VCR lid.
Caution for installation of the VCR lid
When installing the VCR lid, move the VCR lid in the arrow direction, keeping the VCR lid parallel to the main body as
shown below.
4. Removal of the tilt unit
(1)Remove three screws ((b)LX-HZ0018TAFF).
Remove one screw ((d)XiPSF20P04000).
Disconnect three connectors.
Remove the tilt unit from the cabinet of the main body.
(b)
(b)
(d)
(b)
Tilt frame V
Tilt frame C
Battery terminal unit
VCR lid