Sharp UP-3301 Service Manual Download Page 3

Page: 3 / 112

UP-3301US

SPECIFICATIONS

– 1 –

CHAPTER 1. SPECIFICATIONS

1. Appearance

External view

Front view

Rear view

2. Rating

3. Displays

This POS terminal is equipped with a color LCD operator display.

The operator display is a touch panel.

The operations can be performed by touching the screen (that shows

keys or items in the receipt window) of the operator display.

1) Operator display (touch panel)

3-1. Display

1) Front display

* Note that the application software for the UP-3301 uses 16 colors.

The display can be tilted to the best viewing angle by sliding the rear
stand.

External dimensions

11.6(W) x 16.3(D) x 12.6(H) in.
(295(W) x 414.5(D) x 320(H) mm)

Weight

14.6 lbs. (6.6 kg)

Power source

120V AC

10% 60 Hz

Power consumption

Stand-by: 27W
Operating: 51W (max.)

Working temperatures

32 to 104°F (0 to 40°C)

Operator display
(touch panel)

Top cabinet

Money
checking
space

IPL cover

Brightness control

Contrast control

Bottom cabinet

ITEM

SPECIFICATIONS

NOTE

Type

DSTN color LCD with back light

With 256 colors*

Screen size

10.4” Full screen

Dot format

640 (W) x 480 (H) mm Full dot

Dot size

0.09 x RGB(W) x 0.31 mm

Dot space

0.02 mm

Be sure to push the
button on the rear
stand when sliding it.

Summary of Contents for UP-3301

















































































































Search results

Summary of Contents for UP-3301

Reviews:

Related manuals for UP-3301

Brands by name

Popular brands

Sharp UP-3301, Service Manual

Search results

Summary of Contents for UP-3301

Reviews:

Related manuals for UP-3301

Brands by name

Popular brands