Sharp MX-B401 Page 79 Operation Manual Download

Page: 79 / 837

1-40

BEFORE USING THE MACHINE

Contents

BUSINESS CARD FEEDER

This feeder attaches to the automatic document feeder and is used to automatically scan business cards.

Open the original guide to the maximum
width.

Place the business card feeder on the
document feeder tray.

(1) Place the business card feeder in the center

of the document feeder tray.

(2) Gently press down on the business card

feeder.

You will hear the feeder click into place.

• When you have attached the business card feeder, enable "Business Card Scan Option" in the system settings

(administrator).

• When scanning business cards, it is convenient to use "Business Card Scan" in the special modes for copying and

scanning.

Load the business cards.

Make sure the edges of the cards are aligned evenly.
Insert the cards face up all the way into the business card
feeder.

After using the business card feeder, lift
the feeder to remove it.

You will hear a click sound as the feeder is released. Store the
feeder in its storage pocket.

System Settings (Administrator): Business Card Scan Option

Specify whether or not the Business Card Scan function is used.

Summary of Contents for MX-B401






































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-B401

Reviews:

Related manuals for MX-B401

Brands by name

Popular brands

Sharp MX-B401, Operation Manual

Search results

Summary of Contents for MX-B401

Reviews:

Related manuals for MX-B401

Brands by name

Popular brands