Sharp MX-B401 Page 735 Operation Manual Download

Page: 735 / 837

This chapter explains how to install the PPD file to enable printing from a
Macintosh and how to configure the printer driver settings.

☞

MAC OS X: this page
(v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.5)

☞

MAC OS 9.0 - 9.2.2: page 62

MAC OS X

Insert the "Software CD-ROM" into your computer's CD-ROM drive.

Insert the "Software CD-ROM" that shows "Disc 2" on the front of the CD-ROM.

Double-click the [CD-ROM] icon (

) on the desktop.

Double-click the [MacOSX] folder.

Before installing the software, be sure to read "ReadMe First". "ReadMe First" is in
the [US-English] folder in the [Readme] folder.

SETUP IN A MACINTOSH
ENVIRONMENT

• To use the machine as a printer in a Macintosh environment, the machine

must be connected to a network. A USB connection cannot be used.

• The scanner driver and PC-Fax driver cannot be used in a Macintosh

environment.

The explanations of screens and procedures are primarily for Mac OS X v10.4.
The screens may vary in other versions of the operating system.

!mxb401_us_ins.book 52 ページ２００９年１月７日　水曜日　午後３時４２分

Summary of Contents for MX-B401






































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-B401

Reviews:

Related manuals for MX-B401

Brands by name

Popular brands

Sharp MX-B401, Operation Manual

Search results

Summary of Contents for MX-B401

Reviews:

Related manuals for MX-B401

Brands by name

Popular brands