manualshive.com logo in svg

Sharp MX-B401, Operation Manual

Share
Download
Sharp MX-B401 Operation Manual Download Page 697

14

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

3

Printers connected to the 
network are detected. 
Select the machine and 
click the [Next] button.

4

A confirmation window appears. Check the contents and then click 
the [Next] button.

• Machine connection method: LPR Direct Print (Auto Search)

• Set as default printer:Yes (excluding the PC-Fax driver)

• Printer driver name: Cannot be changed

• Display fonts: Installed

If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and 
click the [Next] button.
If you selected other than [LPR Direct Print (Auto Search)], see the following 
pages:

• LPR Direct Print (Specify Address): page 17 

• IPP: page 21

• Shared printer: page 32

• Connected to this computer: page 24

• If the machine is not found, make sure that the machine is powered on and 

that the machine is connected to the network, and then click the [Re-search] 
button.

• You can also click the [Specify condition] button and search for the machine 

by entering the machine's name (host name) or IP address.

☞

Checking the IP address of the machine (page 8)

!mxb401_us_ins.book  14 ページ  ２００９年１月７日　水曜日　午後３時４２分

Summary of Contents for MX-B401






































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands